Fully automatic filling- and sealing machine for 0.25 and 0.5 cc straws.
compact, robust and economical machine for commercial semen production or laboratory research, suitable for all animal species
flexible use for 0.25 or 0.5 cc straws
1 by 1 cycles and short semen runs are specially appropriate for small volumes and valuable ejaculates
The MPP UNO seals and fills 1 straw per cycle. The sealing is performed by means of ultrasonic welding.
Conversion between 0.25 cc straws and 0.5 cc straws, without exchanging any parts, within only 3 minutes. The exchangeable hoppers hold either 2.200 straws of 0.25 cc or about 1.300 straws of 0.5 cc.
The very compact device requires little space. The vacuum pump and the pressure controller are integrated in the device.The ultrasound generator in an extra casing can be mounted at a distance of up to 2.5 m. ON/OFF switch directly on the machine.
The filling and sealing area is completely closed: Best hygienic and safety conditions are therefore fully guaranteed.Optimal control by the user: the filling process is performed right in front of him.
Easy adjustment of the filling duration is possible during the filling procedure: gradual extension or reduction of the filling times with + and – buttons. Fast selection of two user defined filling duration times by means of a switch. In that way the optimal plug humidity is adjustable without any loss of semen. This is ideal, for example, for users of two different extenders with higher and lower viscosity.
Sensor for the vacuum adjustment with large digital display for the actual measured vacuum pressure value. Fast adjustment of vacuum value with built-in ↑ and ↓ buttons. Fast selection of two pre-adjustable vacuum values is possible: a low flow rate for very sensitive sperm cells or a normal filling speed.
Sealing point of the straw with H-cross-design: no width extension, no kinking. Therefore ideal conditions for counting devices and packing in goblets. The sealing doesn’t increase its cross section after extended use like with other conventional systems.
Fast exchange of filling and suction nozzles between the ejaculates due to magnetic holders.
No wearing parts. Very fast and easy cleaning.
Filling speed: approx. 1 straw per second, up to 4,235/hour
Machine dimensions: 370 x 460 x 320 mm (W x D x H)
Dimensions ultrasound generator: 300 x 440 x 130 (W x D x H)
Power supply: 110V / 60Hz or 230V / 50Hz, with earthed standard outlet